Special assembly hoist OPT-9195

   -9195

Prime mover BELARUS-920/82.1/80.1 and its modifications.

Special assembly hoist OPT-9195 on the base of the tractor BELARUS is a multipurpose device. Typical objects of its use are:

  • construction of cities and settlements;
  • laying of water pipelines and channels; construction of bridges; laying of telephone and electric lines; maintenance of air power lines; maintenance of heating mains; construction and repair works; agricultural works; salvage operations.

Use of tractors BELARUS-920/82.1/80.1 and their modifications as prime movers provides high maneuverability and flotation ability of the hoist. Hoisting works can be carried out at the places without motor roads even in winter. Bulldozer blade and other supports that are fixed to auxiliary frame provide stable and safe execution of hoisting works. Bulldozer blade is also used by execution of low-capacity ground works.

Use of tractor trailer with PT-9195 allows execution of loading and transport works. The hoist consists of:

  • rotating column with telescope boom with hook and quick-detachable cradle;
  • auxiliary frame with extendable hydraulic outrigger (supports) and bulldozer blade.

Safety at operation is provided by control systems. There is an emergency engine shutdown system, system of cradle horizon correction in the machine.


Max. load capacity with outriggers, t:

— at minimum boom outreach

2.25

— at maximum boom outreach

0.3

Max. load capacity of cradle, t

0.12

Load moment, KN, m

49.0

Max. hoisting height of hook, m

8.9

Max. load-lowering height of hook. mm

1500

Max. boom outreach, m

7.8

Min. angle of boom swing in horizontal plane, degree

300+10°

Min. angle of boom swing in horizontal plane with blocked kickout device, degree

400

Max. speed of load hoisting and lowering, m/min

8.0

Rotation frequency of revolving superstructure, rpm

1.7

Max. transport speed on the horizontal road with hard surface, km/h

15

Max. weight of hoist without cradle, t

6.4

Max. weight of hoist with cradle, t

6.6

Min. time of full luffing. Sec

24

Max. dimensions of hoist in transport position, mm:

— width

2400

— height

3300

— length with cradle

7190

Track of tractor, mm:

— front track

1600-1700

— rear track

1800

Tire pressure, mPa:

— front wheels, left/right

0.24/0.24

— rear wheels, left/right

0.18/0.18

Service staff, persons

1

Workers in cradle, persons

1

www.astronim.com