Rotary road mower KRD-1,5
Used for grass mowing, decorative clipping of bushes, trees and other plants in the motor roads (roadsides, ditches and safety zones), streets, dips and channels.
There is a special net protective cover on the cutting device for the protection of operator from accidental stones burst. The boom of the mower has an articulated joint that serves for protection of metal construction on meeting of cutting device at "back and up" scheme.
Hydraulic system of the mower is equipped with safety valve, pilot-operated check valves, filter, temperature indicator, which increases the operation life of the device.
Serial production of additional operating element has been arranged: this is cutting head GR-1 (bush cutter) for cutting of bushes and trees in horizontal and vertical planes, with diameter in butt up to 100 mm, with speed of tractor from 0.01 to 2 km/h. In case the tree thickness is over 100 mm but under 180 mm, the cutting is carried out with the stopped tractor by the means of a short consecutive movement of manipulator. Capacity of the bush cutter — 1 km/h.
Installation of interchangeable equipment of pivoting shaft on the chassis makes possible cleaning of the carriage way of streets, roads and pavements from snow and rubbish, planning of the filled-up grounds and filling of ditches and pits.
Dimensions (L/W/H), max, mm
Max. traveling speed, km/h
Capacity per hour, ha/h
Working speed, km/h
Max. boom outreach from tractor axis to the end of operating device, m
Min. ground clearance, mm
Angle of horizontal equivalent of mowed slope, degree
Track of tractor:
— rear track
— front track
Depth of operating device drop, m
Fuel consumption, kg/h
Max. grasp width of the operating device, mm
Rotation frequency of PTO shaft, r/m
Max. width of mowed slopes, mm
Rotation frequency of rotor, r/m
Height of plants cutting, mm
Nominal operating pressure, MPa
Height of cutting of decorative and snow protection plants:
— in horizontal plane, max, mm
Max diameter of cut bush, mm
Max. height of trees cutting, mm
Width of mowed strip, mm
Service staff, persons
Payback of the mower, months
Upon order the mower ÊÐÄ-1,5 can be supplied on the base of the tractor "Belarus" — 82P/920.
|Cutter K-1.01.00.000 (main operating device)||Cutting head GR-1 (additional operating device)|